The manufacturing process of copper door is complex. Shandong copper door manufacturer adopts special process methods and manufacturing requirements to provide users with reliable products. In order to improve product performance, users need to do a good job of maintenance during use. What is the manufacturing process of copper door, and how is the maintenance better?

铜门工艺：

Copper door process:

铜门的主要结构是外部包裹加工好的铜门板型材，内部为钢结构骨架。铜门板工艺如下：处理工艺：除油、除锈、水洗、酸洗抛光、水洗、中和、水洗、着色处理、水洗、干燥及其它后处理。如想达到古铜色，经过上述步骤处理后，可用砂纸适当打磨，方可达到理想的效果。

The main structure of the copper door is that the processed copper door plate profile is wrapped outside, and the steel structure framework is inside. The process of copper door plate is as follows: treatment process: oil removal, rust removal, water washing, acid pickling and polishing, water washing, neutralization, water washing, coloring, water washing, drying and other post-treatment. If you want to achieve the bronze color, after the above steps, you can polish it properly with sandpaper to achieve the desired effect.

于铜门内部的钢骨架，一般需要进行热镀锌处理，然后将钢结构焊接、安装。

As for the steel framework inside the copper door, hot galvanizing treatment is generally required, and then the steel structure is welded and installed.

铜虽然属于防腐材料，但铜门在制作中往往还会对其做进一步的防腐处理。比如，现在表面拉丝，然后进行多次表面清洗、钝化、隔断面板型表面与防腐蚀材料的接触，保持铜原有的颜色。接下来再进行不少于两次的磷化处理，在表面形成一层保护膜，在这之后还要经过喷保护漆、烘烤、自然冷却等步骤，才能完成铜门的制作。

Although copper is an anti-corrosion material, it is often subject to further anti-corrosion treatment during the manufacture of copper doors. For example, now the surface is brushed, and then the surface is cleaned, passivated and cut off the contact between the panel type surface and the anti-corrosion materials for many times, so as to maintain the original color of copper. Next, phosphating treatment shall be carried out for at least two times to form a protective film on the surface. After that, the copper door can be made only after spraying protective paint, baking, natural cooling and other steps.

山东铜门厂家对铜门经过着色处理，提升产品的美感，其使用、观赏价值比较高，而且也具有铜的耐磨性和耐腐蚀性，其使用寿命也比其它门种类要长，因此铜门越来越受到广大消费者的青睐。

Shandong Tongmen manufacturers have colored the copper doors to improve the aesthetic feeling of the products. They have high value in use and appreciation. They also have the wear resistance and corrosion resistance of copper, and their service life is longer than other types of doors. Therefore, the copper doors are more and more favored by the majority of consumers.

铜门的保养很重要，保持外面油漆的完整性，防止磕碰和撞击，如果表面的漆脱落需要刷铜门相近的油漆，平常我们可以用干毛巾对它进行清洁。

The maintenance of the copper door is very important to maintain the integrity of the external paint to prevent collision and impact. If the paint on the surface falls off, it is necessary to brush the paint close to the copper door. Usually, we can clean it with a dry towel.

铜门的保养方法：

Maintenance method of copper door:

在铜门遇到擦伤时，我们可以把那个地方清洗干净，然后在伤口的地方涂上一些防锈油可以避免它来铜板与空气相接触，达到隔离效果起到防止氧化的作用。做好铜门的清洁保养，可以减少它的氧化时间，提高铜门的使用寿命。

When the copper door is scratched, we can clean the place, and then apply some antirust oil on the wound to prevent it from contacting the copper plate with the air, so as to achieve the isolation effect and prevent oxidation. Cleaning and maintenance of the copper door can reduce its oxidation time and improve the service life of the copper door.

本文的精彩内容由山东铜门提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.jnqianfu.com我们有专门的客服为您解答问题

The wonderful content of this article is provided by Shandong Tongmen. There are many wonderful content on this website. You can click to enter more content: http://www.jnqianfu.com We have special customer service to answer your questions