铜门是一种量身定做的产品。它的通常由门扇大小、门板厚度、雕花装饰的繁简以及锁具档次等因素决定。下面来讲讲济南铜门安装方法以及使用事项：

Copper doors are a customized product. Its price is usually determined by factors such as the size of the door leaf, the thickness of the door panel, the complexity of the carved decoration, and the quality of the lock. Let's talk about the installation method and usage of Jinan copper doors:

铜门安装方法

Installation method of copper door

安装玻璃时玻璃与铜板接口处采用玻璃胶密封处理，玻璃与方钢接口处用专用防撞条垫底。

When installing glass, the interface between glass and copper plate shall be sealed with glass glue, and the interface between glass and square steel shall be padded with special anti-collision strips.

门扇的安装：根据门框的位置，在地面上找出相应的位置固定地弹簧，然后安装铜门扇。

Installation of door leaf: According to the position of the door frame, locate the corresponding position on the ground to fix the ground spring, and then install the copper door leaf.

安装铜门标准：铜门与铜门、门框之间的缝隙小于与等于8mm，铜门与铜门之间平整度不大于2mm。

Standard for installing copper doors: The gap between copper doors and copper doors and door frames is less than or equal to 8mm, and the flatness between copper doors and copper doors is not greater than 2mm.

铜门使用事项

Precautions for use of copper doors

不要经常用带有水渍(或其它溶液)的手开启门锁，以免门锁变色。开启门锁或转动门锁把手时，不要用力过猛，从而减少门锁使用寿命。合页、门锁等经常活动的五金配件，发生松动时要立即拧紧。门锁开启不灵时，可以往钥匙孔中加入适量的铅笔芯沫，切记用食用油之类的东西润滑。

Do not often use hands with water stains (or other solutions) to open the door lock, to avoid discoloration of the door lock. When opening the door lock or rotating the door lock handle, do not use excessive force to reduce the service life of the door lock. Frequently moving hardware accessories such as hinges and door locks should be tightened immediately when they become loose. When the door lock does not open properly, you can add an appropriate amount of pencil lead foam to the key hole, and remember to lubricate it with something like cooking oil.

擦拭时，不要使清洗剂或水渗入玻璃压条缝隙内，以免压条变形。擦拭玻璃时不要用力过猛，以免玻璃破损伤及人身。玻璃破损后或有大的磕碰，务必要请维修人员进行维修。

When wiping, do not allow cleaning agent or water to penetrate into the gap of the glass bead to avoid deformation of the bead. Do not use excessive force when wiping glass to avoid glass damage and personal injury. After the glass is damaged or there is a large collision, it is necessary to ask professional maintenance personnel for repair.

铜门表面污迹时(如手印)，可采用哈气打湿后，用软布擦拭，用硬布很容易划伤表面，污迹太重时可使用中性清洗剂、牙膏或家具专用清洗剂，去污后，立即擦拭干净。铜门的棱角处不要经常磨擦，以免造成棱角处饰面材料褪色破损。在木制产品上的灰尘时，不便用软棉布擦除时，可采用吸尘器进行。为保持铜门表面光泽和使用寿命，应定期进行清洁、除尘，可使用木制装修产品专用的养护液对其表面进行养护。

When removing stains on the surface of a copper door (such as fingerprints), you can dampen it with air and wipe it with a soft cloth. Using a hard cloth can easily scratch the surface. If the stains are too heavy, you can use a neutral detergent, toothpaste, or furniture specific cleaning agent. After decontamination, immediately wipe it clean. Do not rub the edges and corners of the copper door frequently to avoid fading and damage of the finishing material at the edges and corners. When removing dust from wooden products, if it is inconvenient to wipe with a soft cotton cloth, a vacuum cleaner can be used to remove it. In order to maintain the surface luster and service life of copper doors, regular cleaning and dust removal should be carried out, and the surface can be cured using a special curing liquid for wooden decoration products.

春冬季，要注意室内通风良好，保持室内湿度，使铜门处于正常的室温、湿度下，金属配件出现蚀锈、封边、饰面材料脱落。在冬季使用电暖气或其他取暖设备时，要远离木制产品，以免使其受热变形。您有需求或者疑惑就来我们网站http://www.jnqianfu.com咨询！

In spring and winter, it is necessary to pay attention to good indoor ventilation and maintain indoor humidity, so that the copper door is at normal room temperature and humidity, and metal fittings appear rust, edge sealing, and decorative materials fall off. When using electric heaters or other heating equipment in winter, keep away from wooden products to avoid deformation due to heat. If you have any needs or doubts, please come to our website http://www.jnqianfu.com consulting service