铜门按照装饰用途可分为豪宅别墅铜门、别墅子母铜门、豪华玻璃铜门、居室铜门、自动旋转铜门、电梯铜门等。那么您在选购时要注意什么事项呢？下面山东铜门厂家为您分析：

Copper doors can be divided into luxury villa copper doors, villa mother copper doors, luxury glass copper doors, bedroom copper doors, automatic rotating copper doors, elevator copper doors, etc. according to their decorative purposes. So what should you pay attention to when choosing? Below, Shandong copper door manufacturers will analyze for you:

1、检查门锁性能及结构

1. Check the performance and structure of the door lock

选择防钻锁头，钻头钻进锁孔后，旋转时锁头会跟随钻头同步旋转，可起到锁头不被破坏的作用。锁具要求三方位锁闭结构，单开门3个合页，双开门6个合页，门扇与门框加暗锁，即使合页被錾掉，门也打不开。

Select an anti drilling lock head. After the drill bit enters the lock hole, the lock head will rotate synchronously with the drill bit during rotation, which can prevent the lock head from being damaged. The lock requires a three directional locking structure, with three hinges for a single door and six hinges for a double door. The door leaf and frame are equipped with hidden locks, and even if the hinges are chiseled off, the door cannot be opened.

2、看门上锁头数量和插杆数量

2. Number of lock heads and insertion rods on the door

较好选择2个锁头各控制2个插杆的门，即使能被破坏，也会拖延时间。一般来讲，一个锁头可控制34根插杆，这样的门防盗性能较差，一旦锁头被损坏，几根插杆同时失去作用。

It is better to choose a door with two locks each controlling two levers, even if it can be damaged, it will delay time. Generally speaking, a lock can control 3 to 4 insertion rods, which results in poor anti-theft performance of the door. Once the lock is damaged, several insertion rods will lose their function at the same time.

3、看锁具周围加强板的厚度和面积

3. Check the thickness and area of the reinforcing plate around the lock

铜门从结构设计上分封闭式和栅栏式两种，不论选择哪一种，锁具是盗窃破坏的主要部位，所以锁具护心板应是厚度超过2毫米的冷钢板，护心板的高度不小于500毫米。

Copper doors can be divided into two types in terms of structural design: closed type and fence type. Regardless of which type is chosen, locks are the main part of theft and damage. Therefore, the lock guard plate should be a cold steel plate with a thickness of more than 2 millimeters, and the height of the guard plate should not be less than 500 millimeters.

4、看工艺质量如何

4. How about the quality of the process

铜门材料选择是根本，制作工艺质量是关键。特别应注重检查有无焊接缺陷，诸如开焊、未焊、漏焊、夹渣等现象。看门扇与门框的配合是否密实，间隙是否均匀一致，开启是否灵活，所有接头是否觅食，油漆电镀是否均匀牢固、光滑等。

The selection of copper door materials is fundamental, and the quality of the manufacturing process is crucial. Special attention should be paid to checking for welding defects, such as open welding, incomplete welding, missed welding, slag inclusion, etc. Check whether the fit between the door leaf and the door frame is dense, whether the gap is uniform, whether the opening is flexible, whether all joints are foraging, and whether the paint plating is uniform, firm, and smooth.

5、从外观设计上挑选

5. Select from exterior design

市面上的铜门分豪华、中档、普通三类。豪华型面板材料为不锈钢板，主框为不锈钢方管制作，花饰栅栏均为不锈钢型材;中档型一般采用方圆钢材和花饰相结合的组合形式;普通型则采用方钢管、圆钢及扁钢(16×4毫米)等材料。用户可根据自己情况选购自己喜爱的类型。

The copper doors on the market are divided into three categories: luxury, mid range, and ordinary. The luxurious panel material is stainless steel plate, the main frame is made of stainless steel square tubes, and the decorative fence is made of stainless steel profiles; The mid range type generally adopts a combination of square and round steel and floral decorations; The ordinary type uses square steel pipes, round steel, and flat steel (16 × 4mm) and other materials. Users can choose their favorite types according to their own situation.

在选购铜门时可以参考五个要点相关内容就讲解完毕了，欢迎您来我们http://www.jnqianfu.com了解更多！

When choosing copper doors, you can refer to five key points. The relevant content has been explained, and you are welcome to come to us http://www.jnqianfu.com Learn more!