网站关键词:
当前所在位置:首页>>常见问题铜门除锈需要注意些什么?常见问题

铜门除锈需要注意些什么?

来源:http://www.jnqianfu.com 日期:2023-08-23 发布人:admin浏览次数:0
一,在平常的铜门保养上,我们可以用干毛巾对它进行清洁,但不能使用含有破坏油漆保护层的化学成分的洗涤剂来清洁,在开启和关闭铜门的时候我们也需要缓慢从而可以在很大程度上避免铜门与其他东西的碰撞而导致铜门的保护层被破坏,还有就是铜门的摆放也很关键,俗语说得好,大门朝南开,财源滚滚来,那么我们的铜门也需要躲避风雨,尽量在铜门两侧有较宽广的水泥柱铜门,以便铜门的转角过多的磨损和生锈。
1、 In normal maintenance of copper doors, we can use a dry towel to clean them, but we cannot use detergents containing chemicals that damage the paint protective layer to clean them. When opening and closing copper doors, we also need to be slow to largely avoid the collision between the copper door and other things, which can cause damage to the protective layer of the copper door. Additionally, the placement of the copper door is also crucial. As the saying goes, the door faces south, Money is rolling in, so our copper doors also need to avoid wind and rain. We should try to have wide cement columns on both sides of the copper doors to prevent excessive wear and rust on the corners of the copper doors.
二,铜门是由电解板制成,在表面喷涂上颜色与铜门相近的油漆,使之看起来与铜门相似,所以就称铜门,我们就能了解到,因为铜门的本身材质的原因,它的保养就很重要,如果它表面的油漆脱落的话,里面的电解板就会暴露出来,而电解板一旦与空气中的氧气接触就会发生氧化反应,导致电解板锈化,影响门的美观,铜门保养铜门很重要的一点就是保持外面油漆的完整性,防止磕碰和撞击。
山东铜门
2、 Copper doors are made of electrolytic panels and coated with paint similar in color to copper doors, making them look similar to copper doors. Therefore, they are called copper doors. We can understand that due to the material of the copper door itself, its maintenance is crucial. If the paint on the surface falls off, the electrolytic panels inside will be exposed, and once the electrolytic panels come into contact with oxygen in the air, oxidation reactions will occur, Causing rust on the electrolytic board and affecting the appearance of the door. It is important to maintain the integrity of the external paint for copper doors to prevent collisions and impacts.
由于别墅大多数远离闹市区,有些往往在一些幽静的密林处,或者靠近水源多的地方,那么这个时候的环境就比较潮湿,别墅铜门就需要细心的保养,接下来教大家3招搞定别墅铜门佳保养问题:
Due to the fact that most villas are far from the downtown area, some are often located in secluded dense forests or close to water sources. At this time, the environment is relatively humid, and the copper doors of villas require careful maintenance. Next, I will teach you three tips to solve the problem of good maintenance for the copper doors of villas:
1.别墅铜门涂油:防碱液,电化学的方法,适用于目前市面所售铜门和各种金属门,如:酒店铜门,小区铜门,学校铜门,九江铜门工厂铜门,商品房铜门和市政工程中。
1. Painting copper doors in villas: Anti alkaline, electrochemical method, suitable for copper doors and various metal doors currently sold on the market, such as hotel copper doors, community copper doors, school copper doors, Jiujiang copper doors factory copper doors, commercial housing copper doors, and municipal engineering.
2.使用机器处理:将磨料,砂石,钢丸抛射到铁艺制品的外表,如喷射处置是利用机械离心,压缩空气,高压水流等为动力,冲击和磨擦掉铜门氧化皮,锈痕,旧漆,型砂等,通过化学反应来除净氧化皮,锈痕,油污,化学处置是利用特殊配方的酸性溶液来浸,铜艺制品,即所谓的酸洗”一般可采用有机溶液。
2. Machine treatment: Abrasives, sand, and steel balls are sprayed onto the surface of iron products. For example, spray treatment uses mechanical centrifugation, compressed air, high-pressure water flow, etc. as power to impact and rub off the oxide skin, rust marks, old paint, molding sand, etc. of copper doors. Chemical reactions are used to remove oxide skin, rust marks, and oil stains. Chemical treatment uses a special formula of acidic solution to soak copper products, The so-called "acid washing" can generally use organic solutions.
3.别墅铜门去锈:清上铙铜门除氧化皮焊渣的其他方法还有手工处理,机械处置,喷射处置,化学处置(酸洗)电化学处置和火焰处理等方法,刮刀,手工处置主要使用砂布,锤凿,钢丝刷,废砂轮等工具,靠手工打磨敲铲,扫刷来除去锈垢,氧化皮及焊渣,尘土等表面污物,除锈枪,机械处置常用的有风(电)动刷,抛光砂轮及风(电)铲等工具,借助机械力的高频冲击与磨擦的作用除锈和氧化皮旧漆等污物。
3. Rust removal for villa copper doors: Other methods for removing oxidation skin and welding slag from the upper brass door include manual treatment, mechanical treatment, spraying treatment, chemical treatment (acid washing), electrochemical treatment, and flame treatment. Scrapers and manual treatment mainly use tools such as sandcloth, hammer chisel, wire brush, and waste grinding wheel, and rely on manual polishing, scraping, and brushing to remove surface dirt such as rust, oxide skin, welding slag, and dust. The rust removal gun is also used, Commonly used tools for mechanical disposal include wind (electric) brushes, polishing grinding wheels, and wind (electric) shovels, which use the high-frequency impact and friction of mechanical force to remove rust and dirt such as oxide skin and old paint.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码