No matter what you purchase, there will always be some small problems after using it for a long time. For example, for Jinan Copper Door, there will be some bumps and bumps after using it for a long time, which can also cause damage to the surface of the door. Moreover, prolonged contact with air can also cause problems with the material of the copper door surface

铜门翻新用什么油漆

What kind of paint is used for the renovation of copper doors

可以用清漆来翻新，好用氟碳清漆，这是专门用在铜质材料上的漆。铜门上刷漆不仅仅是为了翻新，还有增加光泽、防腐等作用，使用清漆来翻新是因为铜门本身的颜色就很特别，不需要用有颜色的漆来装饰，所以一般都是用清漆进行翻新即可。

It can be refurbished with varnish, making it easy to use fluorocarbon varnish, which is specifically used on copper materials. Brushing paint on copper doors is not only for renovation, but also for the purpose of increasing luster and corrosion prevention. The use of varnish for renovation is because the color of the copper door itself is very special and does not require colored paint for decoration. Therefore, it is generally sufficient to use varnish for renovation.

1、注意清洁除锈

1. Pay attention to cleaning and rust removal

铜门要翻新是因为表面有比较多的灰尘，或者有出现锈渍等情况，因此翻新前要对这些问题进行处理，可以先用铲刀将上面的锈渍去除，或者用砂纸摩擦掉，选择砂纸会更好一些，能避免铜门受损。再用清水将铜门都清洁一遍，确保干净无灰尘才能刷漆。

The reason why copper doors need to be refurbished is because there is a lot of dust on the surface or rust stains appear. Therefore, before refurbishing, these issues need to be addressed. You can first use a shovel to remove the rust stains on the surface, or use sandpaper to rub them off. Choosing sandpaper would be better to avoid damage to the copper door. Clean all copper doors with clean water to ensure they are clean and dust-free before applying paint.

2、注意修补

2. Pay attention to repair

铜门去除锈渍后会在表面出现颜色上的差别，因此还需要注意做好修复，可以先刷上一层防锈漆，干燥后再刷一遍黄铜金粉漆，这样就可以与其他区域颜色保持一致，不会出现避免明显的色差，当然干燥后要用砂纸打磨一遍，确保表面都是平整光滑的状态才能上漆。

After removing rust stains on the surface of copper doors, there will be color differences. Therefore, it is necessary to pay attention to repair. You can first apply a layer of anti rust paint, dry it, and then apply a layer of brass gold powder paint. This way, the color can be consistent with other areas and there will be no obvious color difference. Of course, after drying, you need to use sandpaper to polish it once to ensure that the surface is flat and smooth before painting.

3、注意保护

3. Pay attention to protection

铜门上漆过后要将门保持敞开的状态，让粉刷区域进行充分的干燥，而且上方要有遮挡，避免出现阳光直射的问题，因为在暴晒情况下，很容易产生气泡，影响到刷漆效果，而且容易出现表面干，内部不干的情况，后续使用的话就很容易出现起鼓、脱皮等等问题。

After painting the copper door, it is necessary to keep the door open and allow the painted area to dry thoroughly. There should be a cover above it to avoid direct sunlight, as it is easy to generate bubbles under exposure to sunlight, which can affect the painting effect. Additionally, it is easy to have dry surfaces and dry interiors, which can easily cause swelling, peeling, and other problems in subsequent use.