网站关键词:
当前所在位置:首页>>新闻中心铜门呈现铜锈铜斑应该如何处置新闻中心

铜门呈现铜锈铜斑应该如何处置

来源:http://www.jnqianfu.com 日期:2020-12-29 发布人:admin浏览次数:0
如今很多消费者的铜门在长工夫的运用中都会或多或少的呈现一些铜锈或许铜斑,很多消费者在遇到这样的成绩就不晓得该怎样办了,上面铜门厂家远翔铜门就来给大家引见下遇到这样的成绩应该怎样样去停止处置。
Today, many consumers in the long-term use of copper doors will more or less show some copper rust or copper spots, many consumers in the face of such achievements do not know how to do, above the copper door manufacturer Yuanxiang Copper Door to give you an introduction to meet such achievements should be how to stop.
加热法。这种办法次要是针对锈蚀较浅的铁钱。铁锈的次要成分是氧化亚铁,其分子构造比拟疏松,因而应用热胀冷缩的原理即可使局部铁钱的锈蚀零落。但运用这一办法时,必需留意加一个承接器皿(如锅等金属容器),此外较好加一些清水。其次是加热工夫不宜过长,普通旺火加热三四分钟后,取出用冷湿毛巾捂住,锈便会自然零落。选择加热法除锈,对象应是铁质尚好且锈蚀比拟浅的铁钱,相对不能把锈蚀严重且铜体已十分软弱的铜钱用加热法除锈,否则本已非常软弱的铜领会耐不住低温而四分五裂,肝脑涂地
 
Heating method. This approach is mainly directed at iron coins which are less corroded. The secondary component of rust is ferrous oxide, whose molecular structure is comparatively loose, so the local rust of iron money can be scattered by applying the principle of thermal expansion and cold shrinkage. However, when using this method, it is necessary to pay attention to adding a containers (such as pots and other metal containers), in addition, it is best to add some water. Secondly, heating time should not be too long, ordinary fire heating three or four minutes, take out with cold and wet towel cover, rust will naturally fall. Choose heating method to remove rust, the object should be good iron and rust comparable to shallow iron money, relatively can not be seriously corroded and copper has been very weak copper money with heating method to remove rust, otherwise the already very weak copper understanding can not withstand low temperature and split, liver and brain coating
干刷法。遇铜锈或铁锈附着比拟浅时,应尽量防止用醋泡等化学手腕,而可改用干刷的办法。详细办法是选大号油画笔一枝,将笔头上的棕毛剪离根部0.5-0.7厘米即可运用。先将待刷生锈的铜置于玻璃板上,固定住,握住油画笔根部平均地刷,要留意用力,否则效果不佳,然后再用清水洗净。
Dry brush. When the copper rust or rust attachment is comparatively shallow, should try to prevent the use of vinegar foam and other chemical wrists, and can be changed to dry brush method. The detailed method is to select a large brush, brush brown hair cut to 0.5-0.7 cm away from the root can be used. Put the rusty copper to be brushed on the glass board, fix it, hold the brush root evenly, pay attention to the force, otherwise the effect is not good, and then wash it with clean water
新闻资讯
-News and information-
在线客服
二维码

扫描二维码