网站关键词:
当前所在位置:首页>>新闻中心铜门在擦拭、通风方面都有需要注意的方面新闻中心

铜门在擦拭、通风方面都有需要注意的方面

来源:http://www.jnqianfu.com 日期:2021-03-09 发布人:admin浏览次数:0
铜门在擦拭、通风方面都有需要注意的方面,同时还要注意在装修房子的其他部件方面不要影响到铜门的使用情况。如何铜门的寿命我们给大家以下几点意见:
Copper door in wipe, ventilation aspects need to pay attention to, but also pay attention to the decoration of other parts of the house, do not affect the use of copper door. How to improve the service life of copper door
1、使用铜门时,不要在门扇上悬挂过 的物品或bm尖锐的物品刻碰、划,开启或关闭门扇时,不要经常用力过猛或开启角度过大,以免损坏铜门。
1. When using the copper door, do not touch or scratch the hanging objects or BM sharp objects on the door leaf. When opening or closing the door leaf, do not use too much force or open too much angle to avoid damaging the copper door.
2、不要经常用带有水渍(或其它溶液)的手开启门锁,以免门锁变色。开启门锁或转动门锁把手时,不要用力过猛,从而减少门锁使用寿命。合页、门锁等经常活动的五金配件,发生松动时要立j拧紧。门锁开启不时,可以往钥匙孔中加入适量的铅笔芯沫,切记用食用油之类的东西润滑。济南铜门
2. Do not always use hands with water stains (or other solutions) to open the door lock to avoid discoloration. When opening the door lock or turning the handle of the door lock, do not use too much force to reduce the service life of the door lock. Hinge, door lock and other frequently moving hardware accessories should be tightened when they are loose. When the door lock is opened, you can add an appropriate amount of pencil lead foam to the keyhole, and remember to lubricate it with edible oil and other things. Jinan Tongmen
济南铜门
Jinan Tongmen
3、(玻璃铜门)擦拭玻璃时,不要使清洗剂或水渗入玻璃压条缝隙内,以免压条变形。擦拭玻璃时不要用力过猛,以免玻璃破s及人身。玻璃破损后或有大的磕碰,务0要请维修人员进行维修。
3. (glass and copper door) when wiping the glass, do not let the cleaning agent or water penetrate into the gap of the glass bead, so as to avoid the deformation of the bead. When wiping the glass, do not use too much force to avoid the glass breaking and personal injury. If the glass is damaged or there is a big bump, please ask the maintenance personnel to repair it.
4、铜门表面污迹时(如手印),可采用哈气打湿后,用软布擦拭,用硬布很容易划表面,污迹太 时可使用中性清洗剂、牙膏或家具用清洗剂,去污后,立j擦拭干净。铜门的棱角处不要经常磨擦,以免造成棱角处饰面材料褪色破损。在木制产品上的灰尘时,不便用软棉布擦除时,可采用吸尘器进行。为保持铜门表面光泽和使用寿命,应定期进行清洁、除尘,可使用木制装修产品用的养护液对其表面进行养护。
4. When there are stains on the surface of the copper door (such as fingerprints), you can wet it with Harbin air and wipe it with a soft cloth. It is easy to scratch the surface with a hard cloth. When there are too many stains, you can use neutral detergent, toothpaste or furniture detergent. After decontamination, you can wipe it immediately. Do not often rub the edges and corners of the copper door, so as not to cause discoloration and damage of the finishing materials at the edges and corners. When it is inconvenient to wipe the dust on wooden products with soft cotton cloth, a vacuum cleaner can be used. In order to maintain the surface luster and service life of the copper door, it should be cleaned and dusted regularly, and the surface can be cured with the curing liquid used for wooden decoration products.
5、春冬季,要注意室内通风良好,保持室内湿度,使铜门处于正常的室温、湿度下,金属配件出现蚀锈、封边、饰面材料脱落。在冬季使用电暖气或其他取暖设备时,要远离木制产品,以免使其受热变形。
5. In spring and winter, we should pay attention to the good indoor ventilation, keep the indoor humidity, make the copper door at normal room temperature and humidity, metal parts appear rust, edge sealing, and decorative materials fall off. When using electric heating or other heating equipment in winter, keep away from wooden products to avoid deformation due to heating.
6、粉刷墙壁时,要对铜门进行遮盖,以免涂料掉在产品表面,使饰面材料剥离、褪色,影响整体美观。
6. When painting the wall, it is necessary to cover the copper door to avoid the paint falling on the surface of the product, peeling and fading the finishing materials, and affecting the overall appearance.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码