网站关键词:
当前所在位置:首页>>新闻中心铜门被划伤了应该怎么解决?新闻中心

铜门被划伤了应该怎么解决?

来源:http://www.jnqianfu.com 日期:2021-06-10 发布人:admin浏览次数:0
铜门象征着身份以及权力,同样也象征着不平凡。由于铜门的外观比较独特,因此被广泛的使用在富贵人家当中。现在随着人们的生活水平不断提高,即使是普通人家也开始安装了铜门。但是铜门在使用当中,避免不了会被划伤,变得十分难看。这时候应该怎么办呢?济南铜门厂家的小编来给大家说一下解决的方法吧。
The bronze gate symbolizes status and power, as well as the extraordinary. Because of its unique appearance, copper doors are widely used in wealthy families. Now, with the continuous improvement of people's living standards, even ordinary families have begun to install copper doors. But the copper door in use, can not avoid being scratched, become very ugly. What should we do at this time? Jinan copper door manufacturer's small make up to tell you the solution.
一、我们可以先对碰伤的部位进行清洗,然后用我们家里的指甲油涂抹在铜门的表面,或者使用防锈油来使铜板与空气隔离,降低铜门的氧化几率。
First, we can first wash the parts of the bruise, then smear the nail polish on the surface of the copper door, or use antirust oil to separate the copper plate from the air and reduce the oxidation probability of the copper door.
j济南铜门
二、在平常的日常保养中,经常使用清洁剂对铜门伤口处进行擦洗,切忌不要用酸碱强度高的清洗剂去擦拭表面,然后用干毛巾进行擦干,长期保持铜门伤口处干燥的话也能延缓铜门生锈。
2、 In the usual daily maintenance, we often use detergent to scrub the wound of the copper door. Do not use the detergent with high acid-base strength to wipe the surface, and then dry it with dry towel. If we keep the wound of the copper door dry for a long time, it can also delay the rusting of the copper door.
济南铜门维护
Jinan Tongmen maintenance
三、打磨平整,对于硬金属对铜门的划伤,我们要做的就是打磨,因为铜的质地相对于铁比较软,划伤后容易出现凹凸不平的表面,先用砂纸打磨平整。
3、 For the scratch of hard metal on the copper door, the first thing we need to do is to polish, because the texture of copper is relatively soft compared with iron, and the rough surface is easy to appear after the scratch, so we should first polish it with sandpaper.
四、补色,铜门的表面一般都做过颜色处理,很多时候铜门都被做成深色的古铜颜色,当然,也不乏有个别的铜门直接做成原色的,不论怎样都是需要补色的过程。这一点比较困难,一般需要铜门制作厂家来处理。
4、 Complementary color, the surface of the copper door is generally done color treatment, many times the copper door is made into dark bronze color, of course, there are some individual copper door directly made into the primary color, no matter what is the need for complementary color process. This is more difficult, generally need copper door manufacturers to deal with.
如果我们家中的铜门不小心被划伤了,我们需要及时使用毛巾将表面擦干净,然后再将划伤的地方与空气进行隔绝,以免碰到空气之后发生氧化的反应。一旦铜门发生了氧化,就会避免不了发生生锈的情况,从而大大的降低山东铜门的使用寿命,这样的话,对我们来说,是非常不利的。希望小编今天的讲解可以对大家有所帮助。
If the copper door in our home is scratched, we need to use a towel to clean the surface in time, and then isolate the scratched place from the air, so as to avoid oxidation reaction after touching the air. Once the copper door has been oxidized, it will not avoid the occurrence of rust, thus greatly reducing the service life of Shandong copper door, in this case, for us, is very unfavorable. I hope today's explanation can help you.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码