网站关键词:
当前所在位置:首页>>新闻中心铜门上呈现锈斑教你4个处理的方法新闻中心

铜门上呈现锈斑教你4个处理的方法

来源:http://www.jnqianfu.com 日期:2018-10-20 发布人:admin浏览次数:0
铜门上呈现锈斑教你4个处理的方法
The rusty spot on the bronze door teaches you 4 ways to deal with it.
核心提示:铜门的运用一般都是安顿在室外,就会遭遇到风吹雨打所以通过时刻上的洗礼就会呈现锈斑,这样的铜门在外观上就会不美观。在生活中运用铜门自身就是为了提高门面的层次,呈现锈斑就不好看了。山东铜门厂家教你如何铲除锈斑的方法。
Core Tip: The use of copper doors are generally settled outdoors, will encounter wind and rain, so through the baptism of the moment will present rust spots, such a copper door will be unsightly in appearance. The use of copper doors in life is to improve the level of facade, showing rusty spots will not look good. Shandong copper door manufacturers teach you how to remove rust stains.
1.铜生锈了今后上面就会有一层很难洗掉的土锈,这种土锈能够用八十度到九十度的开水来进行浸泡。大约过了五分钟了后把它从开水里边拿出来,在用刷子刷洁净了,让它在阴凉的当地自己干了就能够了。要是土锈很厉害的话,就能够把水加热到欢腾了,土锈就会掉了。
1. Copper rust will have a layer of rust which is difficult to wash off after it is rusted. This rust can be soaked in boiling water of 80 to 90 degrees. After about five minutes, take it out of the boiling water, clean it with a brush, and let it dry in the shade. If the soil rust is very strong, it will be able to heat the water to jubilation, and the soil rust will fall off.
 
2.能够把生锈了铜洗洁净了,然后将它泡到食用醋里边,等个整整今后拿出来,可用刷子把上面剩下来的锈斑除掉,在用洁净的水把上面的醋洗洁净,擦干了就能够了。
2. Can wash the rusty copper clean, and then soak it in edible vinegar, wait for a whole day to come out, you can use a brush to remove the remaining rusty spots on the top, with clean water to wash the vinegar clean, wipe dry can be.
3.如果铜门上的锈斑不是很明显的,较好不要用醋等化学的方法去除,能够用干刷的方法进行。我们能够用比较大的油画笔,把笔头上面的棕毛剪到根部的五毫米到七毫米就能够用了。把要刷的铜门或许其他铜制品固定好了,用油画笔的根部用力的刷,不然的话效果不会很明显,在用洁净的水洗洁净了。
3. If the rust stain on the copper door is not obvious, it is better not to use vinegar and other chemical methods to remove, can be used dry brush method. We can use a larger oil brush and cut the brown hair from the top of the brush to the bottom of the brush by 5mm to 7mm. Fixed the door to be brushed or other copper products, brush with the brush at the root of the brush, otherwise the effect will not be obvious, clean with clean water.
4.对一些比较浅的铁锈,由于它们的分子结构比较散,所以能够通过加热的方法让锈斑掉下来。另外能够用刀把锈斑给去掉,不必不要太用力了,不然就会划伤铜门了,所以说要是没有掌握的话就不要用这个方法了。
4. For some relatively shallow rust, because their molecular structure is relatively scattered, so the rust spots can be dropped by heating. In addition, you can use a knife to remove the rust spots, do not have to exert too much force, otherwise you will scratch the copper door, so if not mastered, do not use this method.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码