铜门材质鉴别要点一：看色泽的对开铜门具有玫瑰红色的金属光泽，表面形成氧化膜后呈紫色，故一般称为紫铜，光泽暗淡或者表面发黑的多为劣质材料。

Copper door material identification key points 1: look at the color and luster of the open copper door has a rose red metallic luster, and the surface is purple after the formation of oxide film, so it is generally called red copper, and the materials with dim luster or black surface are mostly inferior materials.

铜门材质鉴别要点二：向商家询问铜板的纯度、工艺，或向商家索取原料的检验报告等。

The second key point of copper door material identification: ask the merchant about the purity and process of copper plate, or ask the merchant for the inspection report of raw materials, etc.

铜门材质鉴别要点三：之后货比三家。同类型的产品，过低的谨慎购买。总的来说在购买之时好向有的人请教，或是向机构咨询，上当受骗。

Three key points of copper door material identification: shop around later. If the price of the same type of product is too low, buy it carefully. Generally speaking, it is good to consult some people or institutions at the time of purchase, and you will be deceived.

山东铜门厂家来看一下铜门德颜色问题，铜门，金碧辉煌、沉稳厚重，给人的常常是一种庄严圣的感觉。铜门，以前常用于深宅要地既是身份也是门内平安的屏障。如今铜门开始现身于家居被引入公寓、别墅其气度的外观.的特X为主人撑足了面子。

Shandong Tongmen manufacturers take a look at the color of Tongmen de. Tongmen is resplendent, calm and thick, which often gives people a sense of solemnity. The copper gate, which was often used in deep houses and important places, is both an identity and a barrier for peace inside the gate. Nowadays, Tongmen has begun to show up in the appearance of the magnanimity of apartments and villas where home furnishings have been introduced. Special X has given the owner enough face.

目前，用于落外檐的铜门形体较大，雍容华贵，而作为普通公寓的户门，虽然体型稍小，却同样富派，品味不俗。

At present, the copper door used for the outer eaves is large and elegant. As an ordinary apartment door, although it is slightly smaller, it is also rich and tasteful.

现代拉丝铜门的颜色可以做到近十种。铜门的为钢结构骨架，外部包裹好的铜面板型材。易折弯塑X，不易开裂的T2紫铜带是铜门面板好的型材，在铜门中运用较多。铜虽然属于防腐材料，但铜门在制作中往往还对其做进一步的防腐处理。

There are nearly ten colors of modern brushed copper doors. The copper door is a steel structure skeleton, with copper panel profiles wrapped outside. T2 copper strip, which is easy to bend plastic X and not easy to crack, is a good profile for copper door panel and is widely used in copper doors. Although copper is an anti-corrosion material, it is often further treated during the manufacture of copper doors.

比如，先在表面拉丝，然后进行多次表面清洗、钝化，隔断面板型材表层与腐蚀材料的接触，保持铜原有的颜色。接下来再进行不少于两次的磷化处理，在表面形成一层保护膜，这之后还要经过喷保护漆、一6摄氏度烘烤、自然冷却等步骤，成品铜门才能终完成。

For example, wire drawing shall be carried out on the surface first, and then surface cleaning and passivation shall be carried out for many times to isolate the contact between the surface of panel profile and corrosive materials and maintain the original color of copper. Next, phosphating treatment shall be carried out for no less than two times to form a protective film on the surface. After that, the finished copper door can be finally completed after spraying protective paint, baking at a temperature of 6 ℃ and natural cooling.

于门里的钢骨架，都进行了热镀锌处理，然后将铜结构焊接、安装。另外，与其他材质的门一样，铜门也要，工人现场勘察细部尺寸后，再回去根据相关数据与图形下料，然后安装。

As for the steel framework in the door, it was hot-dip galvanized, and then the copper structure was welded and installed. In addition, like doors made of other materials, copper doors also need to be installed after workers investigate the detailed dimensions on site, and then go back to blanking according to relevant data and graphics.

铜门材质鉴别要点就从以上几个方面来看了看，更多相关内容就来我们网站http://www.jnqianfu.com咨询了解吧。

The key points of copper door material identification are seen from the above aspects. For more relevant content, please come to our website http://www.jnqianfu.com Consult and understand.