铜门在安装完毕后，现场施工还没完成，装修还在进行，要注意什么情况出现呢？下面济南铜门生产厂家为您解答。

After the installation of the copper door, the on-site construction has not been completed, and the decoration is still in progress. What should we pay attention to? Now, the manufacturer of Jinan Copper Door will answer for you.

（1）用指定合适的包装袋覆盖好铜门的表面，告知装修所有工人出入门口注意保护；

(1) Cover the surface of the copper door with a designated appropriate environmental protection packaging bag, and inform all decoration workers to pay attention to safety protection at the entrance and exit;

（2）避免任何的坚硬物对门碰撞、摩擦导致铜门内或表面层的损坏，或使得后期铜门更容易发生氧化反应。

(2) Avoid the damage of the inner or surface layer of the copper door caused by the collision and friction of any hard object on the door, or make the copper door more prone to oxidation reaction in the later period.

（3）不能有水泥、油漆等其它酸、碱成分的物质靠近或碰触铜板表面，如不慎碰触，须及时以减少对铜板的侵害。可用清水棉布慢慢擦试去掉。

(3) There shall be no cement, paint and other acid and alkali substances near or touching the copper plate surface. If they are accidentally touched, they must be removed in time to reduce the damage to the copper plate. Wipe it off slowly with clean cotton cloth.

如遇铜门上有些附着物较为坚硬，不易一次洗掉，切记在清洁时不能用金属或硬物强行除去。可用清水反复打湿，使附着物软化或溶解，再用竹、木削尖一点点地剥落。

If some attachments on the copper door are hard and difficult to wash off at one time, remember not to remove them with metal or hard objects during cleaning. Use clean water to wet repeatedly to soften or dissolve the attachment, and then use bamboo and wood to peel off.

对有孔的或镂空的部分、其它藏污垢的缝隙部位，可多喷点“泡沫清剂”后用软布轻轻擦出，严禁使用钢丝球、钢丝刷或其它有可能伤害到铜板的东西进行擦拭。

For perforated or hollowed parts and other crevices containing dirt, spray more "foam cleaner" and gently wipe them out with a soft cloth. It is strictly prohibited to use steel balls, wire brushes or other things that may damage the copper plate.

铜门安装完毕但在装修中要注意什么？以上就是问题的相关解答了，您对此有什么想法可以来我们网站http://www.jnqianfu.com咨询！

After the installation of the copper door, what should be paid attention to in the decoration? The above is the relevant answer to the question. If you have any ideas about it, please come to our website http://www.jnqianfu.com consulting service