想要让庭院铜门充分发挥其作用，一定要注意对门的安装测量方法，如果安装不规范，或者别的方面有问题，会影响用户的使用的，那么下面济南铜门厂家就来为您讲讲庭院铜门安装测量以及注意事项。

If you want to make the courtyard copper door play its role fully, you must pay attention to the installation and measurement methods of the door. If the installation is not standardized or there are problems in other aspects, which will affect the use of users, then the Jinan copper door manufacturer will tell you about the installation measurement and precautions of the courtyard copper door.

庭院铜门安装测量

Installation measurement of courtyard copper door

测量庭院铜门门洞上、中、下三部分是否一致。测量门误差后，应校正误差大于20mm的墙洞。在校正过程中，可用水泥砂浆或石灰进行校正。

Measure whether the upper, middle and lower parts of the courtyard copper door opening are consistent. After measuring the door error, the wall opening with error greater than 20mm shall be corrected. During the correction, cement mortar or lime can be used for correction.

测量后，若壁厚误差大于5mm，则需进行修正。如果墙是T形墙，则需要用细木工板做一个宽度为50-60mm的假墙来放置门框线。厚度应与壁厚相同。

After measurement, if the wall thickness error is greater than 5mm, it needs to be corrected. If the wall is a T-shaped wall, you need to make a 50-60mm wide false wall with blockboard to place the door frame line. The thickness shall be the same as the wall thickness.

如果门洞上有突出的横梁，则不能安装上门套线。此时还需用细木工板做一道50-60mm高的假墙，其长度与门洞宽度相同，门洞厚度相同。

If there is a protruding beam on the door opening, the upper door threading cannot be installed. At this time, it is also necessary to make a 50-60mm high false wall with blockboard, the length of which is the same as the width of the door opening, and the thickness of the door opening is the same.

庭院铜门注意事项：

Precautions for courtyard copper door:

很多家庭在装修时会选择庭院铜门，这样可以体现出自己的装修风格。安装时一定要小心，正确安装，否则不仅会损坏门表面，还会造成冲击和隐患。

Many families will choose the courtyard copper door when decorating, which can reflect their own decoration style. Be careful and install correctly during installation, otherwise it will not only damage the door surface, but also cause impact and hidden danger.

铜门和墙有很多连接方法。常用的焊接方法有燕尾铁脚及埋件、固定钢板及射钉、固定钢板及金属膨胀螺栓、燕尾铁脚焊接等。

There are many ways to connect copper doors and walls. Common welding methods include dovetail iron feet and embedded parts, fixed steel plates and nails, fixed steel plates and metal expansion bolts, dovetail iron feet welding, etc.

铜门与砖墙之间的连接可以通过固定钢板与金属膨胀螺栓的连接来固定，但要注意的是，固定钢板铜门墙之间的缝隙要用水泥砂浆填实，以增加牢固度。

The connection between the copper door and the brick wall can be fixed by connecting the fixed steel plate and the metal expansion bolt, but it should be noted that the gap between the fixed steel plate and the copper door wall should be filled with cement mortar to increase the firmness.

铜门与钢筋混凝土墙的连接方法与瓷砖墙类似。可采用钢板与钉子或金属膨胀螺栓固定的方法。但应注意的是，门与墙之间的缝隙须用水泥砂浆填实，以提高稳定性。

The connection method of copper door and reinforced concrete wall is similar to that of ceramic tile wall. The method of fixing steel plate with nail or metal expansion bolt can be adopted. However, it should be noted that the gap between the door and the wall must be filled with cement mortar to improve stability.

庭院铜门在使用前，需要做好安装和测量准备工作，做好门测量和安装的基础工作，并注意正确的操作模式，这样才能保障项目的高质量。更多相关内容就来我们网站http://www.jnqianfu.com进行咨询吧！

Before using the courtyard copper door, it is necessary to prepare for installation and measurement, do a good job in the basic work of door measurement and installation, and pay attention to the correct operation mode, so as to ensure the high quality of the project. More relevant content will come to our website http://www.jnqianfu.com Consult!