网站关键词:
当前所在位置:首页>>新闻中心工程铜门在用久了之后会如何?新闻中心

工程铜门在用久了之后会如何?

来源:http://www.jnqianfu.com 日期:2022-12-30 发布人:admin浏览次数:0
工程铜门在生产完,出厂时,都是比较鲜艳亮丽的,工程铜门华丽的外表也是吸引众人的重要原因之一。而工程铜门在安装完成之后,又会发生什么样的变化呢?我们又应该怎样处理呢?这也是大家一致关注的问题。下面山东铜门厂家为您解答。
The engineering copper doors are bright and beautiful after production and when they leave the factory. The gorgeous appearance of the engineering copper doors is also one of the important reasons for attracting people. What changes will happen to the engineering copper door after installation? How should we deal with it? This is also a matter of common concern. Next, Shandong copper door manufacturer will answer for you.
正常的工程铜门在选择款式时,都会有不同的颜色作为选择,而构成这些颜色的关键就是油漆。工程铜门也是需要做油漆处理的,不仅仅是为了颜色,更是对工程铜门的保护,防止其表面的氧化。
Normal engineering copper doors have different colors when choosing styles, and the key to these colors is paint. The engineering copper door also needs to be painted, not only for color, but also for the protection of the engineering copper door to prevent its surface from oxidation.
如果说用正常的油漆,工程铜门在用久了之后,在光泽上多会出现暗淡等现象,这就是需要我们做工程铜门保养的主要原因之一,经常擦拭工程铜门表面,并且做擦油、打蜡等表面处理,会让工程铜门色光泽一直维持,始终亮丽如新;
If normal paint is used, the luster of engineering copper doors will be dim after a long time of use, which is one of the main reasons why we need to do the maintenance of engineering copper doors. Frequently wipe the surface of engineering copper doors, and do surface treatment such as oil wiping and waxing, which will keep the color and luster of engineering copper doors as bright as new;
山东铜门
而如果用到了一般的油漆,比如一些仿工程铜门,在低的情况下,是很难保证油漆质量的,这些工程铜门在用了一段时间后,就会出现变色的情况,这样的变化往往让工程铜门会变得很难看,所以消费者在选择工程铜门时,一定要选择对的工程铜门厂家。
However, if ordinary paint is used, such as some imitation engineering copper doors, it is difficult to ensure the quality of paint at a low price. After using these engineering copper doors for a period of time, the color will change. Such changes often make the engineering copper doors look ugly, so consumers must choose the right manufacturer when choosing the engineering copper doors.
工程铜门的原材料铜,是很难发生氧化反应的,所以一般的工程铜门是不太会出现生锈的状况,这要比其他的铁门、铸铝门要强的多。但是一些工程铜门选用的是锌合金内架,做成的锌合金工程铜门,这样的工程铜门在经过日晒雨淋后,其内部很容易就会发生腐蚀的状况,锌这种金属的活动性太强,易与空气发生氧化反应,而经过雨水作为介质的话,就会加速他的内部腐蚀情况,这样会造成工程铜门的整个结构不稳定,强度不够,工程铜门的防盗性能也大大地降低。因此在选择工程铜门时,一定要认准选择不锈钢内架。
The raw material of engineering copper doors is copper, which is difficult to oxidize. Therefore, ordinary engineering copper doors are less likely to rust, which is much stronger than other iron doors and cast aluminum doors. However, some engineering copper doors are made of zinc alloy. After being exposed to the sun and rain, the interior of such engineering copper doors is prone to corrosion. The mobility of zinc is too strong, which is easy to react with the air. If rain is used as the medium, the internal corrosion will be accelerated, which will cause the entire structure of the engineering copper doors to be unstable and the strength to be insufficient, The anti-theft performance of engineering copper doors is also greatly reduced. Therefore, the stainless steel inner frame must be selected correctly when selecting the engineering copper door.
工程铜门在使用的时候,难免会出现碰撞、刮花的情况,这对工程铜门的表面影响是大的,不仅影响了工程铜门表面的美观程度,还会对工程铜门表面的保护层造成破坏,可能会加快上面两种情况的发生。这种情况就需要专门的工作人员做处理了。您有什么问题就来我们网站http://www.jnqianfu.com咨询吧!
When the engineering copper door is used, it is inevitable that there will be collisions and scratches, which will have a great impact on the surface of the engineering copper door, not only affecting the aesthetic degree of the surface of the engineering copper door, but also causing damage to the protective layer of the surface of the engineering copper door, which may accelerate the occurrence of the above two situations. This situation requires special staff to deal with it. Come to our website if you have any questions http://www.jnqianfu.com Consult!
新闻资讯
-News and information-
在线客服
二维码

扫描二维码