网站关键词:
当前所在位置:首页>>新闻中心山东铜门生产厂内部是什么样?新闻中心

山东铜门生产厂内部是什么样?

来源:http://www.jnqianfu.com 日期:2019-05-28 发布人:admin浏览次数:0
  装修时,
  When decorating,
  这扇门不容忽视
  This door should not be neglected.
  如果你想展示你的品质
  If you want to show your qualities
  还是要选择纯铜门
  Or choose pure copper doors
  上市定做铜门
  Customized Copper Door
  一般直接装回家出货
  Usually loaded directly home for shipment里面什么都没有There's nothing in it.
  如果可以去铜门工厂车间看看工艺流程
  If you can go to the workshop of Tongmen factory to see the process flow那就容易多了That would be much easier.
  今天,小编就带你走进来
  Today, Xiaobian will take you in.
  “一鸣铜门”工厂厂房
  "Yiming Copper Gate" Factory Building
  看看铜门的生产工艺
  Look at the production process of copper doors0101
  镀锌钢管龙骨架架
  Galvanized steel pipe keel framework
                           山东铜门
  里面有一扇青铜门
  There is a bronze door inside.
  采用镀锌钢管龙骨架结构更坚固
  Stronger structure with galvanized steel pipe keel还有一点很重要Another important point is that
  钢管的数量和管段的位置
  Number of Steel Tubes and Position of Pipe Sections确定了框架的框架稳定性The frame stability of the frame is determined.
                   山东铜门
  02
  02
  PVC防火板
  PVC FireBoard
  “一鸣铜门”采用防火防潮PVC板
  "Yiming Copper Door" adopt fire-proof and moisture-proof PVC board耐磨、高密度、防潮Wear-resistant, high density, moisture-proof防水、防火、隔音性能好Water-proof, fire-proof and sound-proof
  然而,
  However,
  其他人则试图省钱
  Others are trying to save money.
  可使用木工板
  Woodworking boards can be used
  甚用纸板作为内芯的填充材料
  Even using cardboard as the filling material for the inner core温州是潮湿的Wenzhou is wet.
  木工板、纸板可能发霉
  Woodboard and cardboard may be mildewed
  它影响着家庭的健康和门的使用寿命
  It affects the health of the family and the service life of the door.
  03
  03
  铜镀层的抗氧化处理
  Anti-oxidation Treatment of Copper Coating(原始铜)(original copper)
  铜的表面使用了与豪华车相同的技术
  Copper surfaces use the same technology as luxury cars.
  涂料表面抗氧化处理技术
  Antioxidant Treatment Technology of Coatings Surface使铜门更耐用Make the copper door more durable
  保持颜色均匀明亮
  Keep the color even and bright
  面板采用纯铜板制作,厚度0.8mm
  The panel is made of pure copper plate with thickness of 0.8mm.
  区分镀铜和镀铜
  Distinguishing between copper plating and copper plating从铜板的背面和横截面可以看出It can be seen from the back and cross section of the copper plate.
  纯铜的横截面是铜的
  The cross section of pure copper is copper.
  铜是一种白色的不锈钢
  Copper is a white stainless steel.
  所以我们必须去看看
  So we have to go and see it.
                           山东铜门
  眼见为实
  Seeing is believing.
  04
  04
  都是手工制作的
  They are all handmade.
  铜门的生产周期较长
  The production cycle of copper door is longer因为铜门是手工制作的Because the copper door is handmade.
  从一开始焊接框架
  Welding frames from the beginning
  固定在PVC防火板上
  Fixed on PVC fire board
  较后,铜币是手工制作的
  Finally, copper coins are made by hand.
  铜门是采用中性硅胶风化而成
  Copper door is weathered by neutral silica gel.
  是一种专门用于铜门的工业胶粘剂
  It is an industrial adhesive specially used for copper doors.
  耐寒耐热
  Cold resistance and heat resistance
  适用于玻璃、铝、钢和石材
  Suitable for glass, aluminium, steel and stone能产生良好的附着力Can produce good adhesion
  05
  05
  设计
  Patent design
  青铜门并不便宜
  Bronze doors are not cheap
  我们都想要新颖别致的东西
  We all want something new and unique.
  一个明铜门是一个家庭
  A bronze door is a family.
  具有原厂设计能力
  Have original design ability
  上面的青铜门获得了
  The bronze door above was patented.
  不仅如此
  More Than This
  还可以根据业主个人喜好
  It can also be based on the personal preferences of the owners.
  做设计调整
  Make design adjustments
  去沂明铜门厂买铜门
  Going to Yiming Copper Gate Factory to Buy Copper Gate它不只是去市场挑选产品It's not just about picking products from the market.
  从设计开始
  Start with design
  然后,所有者可以参与其中
  Then, the owner can participate.
  这样的产品可以更好的满足心灵
  Such products can better satisfy the soul0505
  质量认证
  quality certification
  买铜门较好去厂家
  The best way to buy copper door is to go to the manufacturer.
  更重要的是去质量有保障的厂家
  More important is to go to quality assured manufacturers
新闻资讯
-News and information-
在线客服
二维码

扫描二维码