分类导航
新闻
联系我们
济南宏大隆昌商贸有限公司
联系电话：15066683078
联系地址：济南市天桥区历山北路黄台装饰不锈钢市场北区28号
铜门的上色工艺介绍
来源：http://www.jnqianfu.com 日期：2018-10-20 发布人：admin浏览次数：0
铜门的上色工艺介绍
Introduction to the coloring process of copper door
以铜门为主的修建，铜赋性温润，耐腐蚀，抗氧化，不易受损，寿长于木材，较之砖瓦，铜门更耐岁，并且风韵杰出，色彩艳丽，淳厚沉稳中不失精致，苍古盎然中蕴涵新意。经过精工打造，匠心诚厚，诸形工美。承传统修建之典雅，又不失原料的巩固，且防水，防腐，将精深的铜工艺与现代科技结合，可令有限的空间蒸发无限的气量。
Built mainly with copper doors, copper has a warm nature, corrosion resistance, anti-bacterial and anti-oxidation, not easy to damage, longevity is longer than wood, more durable than bricks and tiles, copper doors, and charm, brilliant colors, honest and steady without loss of refinement, ancient and full of new meaning. After Seiko made, ingenuity is thick, all shapes and workmanship are beautiful. Inheriting the elegance of traditional construction, without losing the consolidation of raw materials, and waterproof, anti-corrosion, the perfect combination of sophisticated copper technology and modern technology, can make limited space evaporation of unlimited gas.
1.铜和铜合金的单一上色
1. the single color of copper and copper alloys.
(1)铜着古铜色；K2S5克/升;(NH4)2SO420克/升;15℃;浸30秒；Cu(AC)230克/升;NH4AC50克/升;CuSO44克/升;NH4Cl1克/升;95℃;浸30秒。
(1) Copper stained bronze; K2S5g/L; (NH4) 2SO420g/L; 15 degrees Celsius; Immersion 30 seconds; Cu (AC) 230g/L; NH4AC50g/L; CuSO44g/L; NH4Cl1g/L; 95 degrees Celsius; Immersion 30 seconds.
(2)黄铜着巧克力色；KMnO47.5克/升;CuSO460克/升;95～98℃;浸2～3分钟。
(2) brass with chocolate; KMnO47.5 g / L; CuSO460 g / L; 95~98 C; dip for 2~3 minutes.
(3)铜或黄铜着亮褐色；BaS3.8克/升;(NH4)2CO32克/升;
(3) copper or brass bright brown; BaS3.8 g / L; (NH4) 2CO32 g / L;
经过湿擦或反复浸渍更清亮。
After wet or repeated impregnation, it is more clear.
2.铜彩色版制作法
2. copper color plate making method
将铜箔粘于塑料表面，经热压成凸凹不平的筋纹、图画等，经惯例清洗后，一步将整版着成黑色;第二步除掉凸部的黑膜显露铜基体;第三步凸部上色，遂构成彩色版。可用于建材、厨房、家具及仪器之装修。
The copper foil is adhered to the plastic surface, hot-pressed into uneven ribs, drawings and so on. After routine cleaning, the first step is to make the whole plate black; the second step is to remove the black film of the convex part to expose the copper substrate; the third step is to make the color plate by coloring the convex part. It can be used for decoration of building materials, kitchens, furniture and instruments.
1惯例清洗后浸入硫化钠饱和溶液中一分钟着成黑色，清洗枯燥后，用金刚砂纸除掉凸部黑膜，然后浸入硫代硫酸钠80克/升、醋酸铜5克/升、柠檬酸5克/升的溶液中，40分钟后得金黄色。
1. After routine cleaning, soak in sodium sulfide saturated solution for one minute and become black. After cleaning, remove the convex black film with emery paper. Then immerse in sodium thiosulfate 80 g / L, copper acetate 5 g / L, citric acid 5 g / L solution. After 40 minutes, get golden yellow.
2若浸入硫代硫酸钠、醋酸铜配成15%的溶液，随浸渍时刻的延伸可得到淡红、赤色、赤赤色、红紫色、黄金色、赤金色、红绿色、绿紫色、灰黑色等多种色彩，当到达某一所需的色彩时，提出清洗枯燥，上清漆保护。
If soaked in sodium thiosulfate, copper acetate solution of 15%, with the extension of soaking time can be light red, red, red, red purple, red purple, gold, red gold, red green, green purple, gray black and other colors, when reaching a required color, put forward to clean dry, varnish protection.
选用喷涂、麻布擦洗、浸渍均可。喷涂或擦洗时每需200～300毫升。涂布后让其天然枯燥→水洗→枯燥后再重复一次，则能取得结合力的孔雀绿，较终涂通明清漆以增加美感。
Spraying, linen scrubbing and soaking can be used. Spraying or scrubbing requires 200~300 milliliters per square metre. After coating, let it be naturally dry washed dry again, then can obtain excellent adhesion of malachite green, eventually coated with clear varnish to increase aesthetic feeling.
- 上一篇：铜门用漆时需要留意哪些问题
- 下一篇：铜门的优点和门窗职业关于的要害
