网站关键词:
当前所在位置:首页>>常见问题 铜在装饰加工时需要注意哪些事项!常见问题

铜在装饰加工时需要注意哪些事项!

来源:http://www.jnqianfu.com 日期:2021-06-18 发布人:admin浏览次数:0
众所周知铜也是一种金属物,从而的可以使用很多的加工方法,所以我们在利用焊接的方式来进行铜装饰加工的时候,需要注意操作步骤,这样才能保证产品性能。
As we all know, copper is also a metal, so we can use a lot of processing methods, so we need to pay attention to the operation steps when we use welding to process copper decoration, so as to ensure the product performance.
山东铜门厂家简述焊接工艺很重要,焊接质量的好坏直接影响装配质量,因此在构件安装时,要严格控制焊接处的间隙,错边等误差,经安装装配后的焊接节点须经专人检查合格后才能交焊工施焊。
The welding process is very important for Shandong copper door manufacturer. The welding quality directly affects the assembly quality. Therefore, during the component installation, the gap, misalignment and other errors of the welding joint should be strictly controlled. The welding joint after installation and assembly must be inspected by a special person before welding.
铜装饰加工的焊接操作可以分为三步,先做好准备工作,再开始焊接,然后检查焊接效果。装配好的铜装饰在加工前先检查焊接节点,看焊接位臵的脚手搭设是否可靠;然后清理焊接坡口区,为焊接做准备。
The welding operation of copper decoration processing can be divided into three steps, first make preparations, then start welding, and then check the welding effect. Before processing the assembled copper decoration, check the welding joints to see whether the scaffold of the welding position is safe and reliable; Then clean the welding groove area to prepare for welding.
进行铜装饰加工时,为了避免焊接变形,要采用对称焊接(包含对焊、立焊、斜焊);且焊接过程中逐道焊缝清渣,去除飞溅物,发现缺陷要及时用角向砂轮打磨,除去缺陷。如此,依次对每一个焊接节点进行操作。
In order to avoid welding deformation, symmetrical welding (including butt welding, vertical welding and oblique welding) should be used in copper decoration processing; During the welding process, the slag should be removed one by one to remove the spatter. If any defect is found, the angular grinding wheel should be used in time to remove the defect. In this way, each welding node is operated in turn.
焊后检查对铜装饰加工也很重要。等到焊缝冷却,进行焊缝外观的检查。在焊缝中不得有裂缝,焊缝金属与母材间完全熔合,且所有破口均被填满,才能保证铜装饰的美丽外观。
Post weld inspection is also very important for copper decoration processing. Wait until the weld is cooled, and check the appearance of the weld. There should be no cracks in the weld, the weld metal and the base metal should be completely fused, and all the cracks should be filled, so as to ensure the beautiful appearance of copper decoration.
新闻资讯
-News and information-
在线客服
二维码

扫描二维码