随着时代的发展，自动式的铜旋转门也逐渐受到人们的喜爱，它可以调节速度，增加流量。那么铜自动旋转门故障不运行维修方法是怎样的呢？山东铜门厂家为您讲解。

With the development of the times, the automatic copper revolving door is gradually loved by people. It can adjust the speed and increase the flow. Then what is the maintenance method of copper automatic revolving door without operation? Shandong Tongmen factory will explain it to you.

1.外部无输入电源，检查旋转门外部电源那里断路。

1. There is no external input power supply. Check the external power supply outside the rotary door for open circuit.

2.内部控制箱无电源，检查空开是否断开或是否线路接触不良。

2. There is no power supply in the internal control box. Check whether the air switch is disconnected or whether the line is in poor contact.

3.变频器报警，断电两分钟后重新送电(如断电一次无法排除故障请通知我司)

3. The frequency converter gives an alarm, and the power is sent back after two minutes of power failure (if the failure cannot be eliminated once, please inform our company)

4.红外防夹探测区内有阻挡物，移除阻挡物。

4. There are obstacles in the infrared anti pinch detection area. Remove the obstacles.

5.光线检测区内有阻挡物或偏向，移除阻挡物，调整方位。

5. There are obstacles or deviations in the safe light detection area. Remove the obstacles and adjust the orientation.

6.立柱防夹感应器受到外部挤压，将防夹胶条复原，看有无挤压部位。

6. When the column anti pinch sensor is pressed by the outside, restore the anti pinch adhesive strip to see if there is any pressed part.

7.处于消防状态，检查消防通道开关是否按下。

7. In the fire-fighting state, check whether the fire-fighting channel switch is pressed.

8.防夹脚感应器前有异物，清理杂物。

8. There are foreign matters in front of the anti pinch sensor. Clean up the sundries.

9.机械卡位，按下急停开关，转动门体看有无卡紧现象。

9. Mechanical clamping: press the emergency stop switch and rotate the door body to see if there is clamping.

铜自动旋转门故障持续运转不静止维修方法

Maintenance method of copper automatic revolving door with continuous operation

1.感应探头检测区内有移动物体，移除移动物体。

1. There are moving objects in the detection area of the induction probe. Remove the moving objects.

2.密封毛刷进入探头检测区内，调整探头角度或整理毛刷。

2. When the sealing brush enters the probe detection area, adjust the probe angle or arrange the brush.

3.旋转门无法定位，检查定位接近传感器。

3. The rotary door cannot be positioned. Check the positioning proximity sensor.

铜自动旋转门故障平滑门无法开启维修方法

Maintenance method of copper automatic revolving door failure (smooth door cannot be opened)

1.平滑门无电源，打开平滑门电源。

1. There is no power supply for the smooth door. Turn on the power supply for the smooth door.

2.查看是否是平滑门控制存在问题。

2. Check whether there is a problem with the smooth door control.

铜自动旋转门故障平滑门无法关闭维修方法

Maintenance method of copper automatic revolving door failure (smooth door cannot be closed)

1.光线间有阻挡物，移除阻挡物。

1. There are barriers between the safety lights. Remove the barriers.

2.感应探头检测区有移动物体，移除移动物体。

2. There are moving objects in the detection area of the induction probe. Remove the moving objects.

3.外部消防联动有输入，恢复消防联动。

3. The external fire linkage has input, and the fire linkage is restored.

我司作为一家从事旋转门从设计安装到售后维修维护的公司，也经常处理各种铜旋转门故障，您可以来此http://www.jnqianfu.com进行订购或者咨询相关事项。

As a company engaged in the design, installation and after-sales maintenance of revolving doors, our company often handles various copper revolving doors. You can come here http://www.jnqianfu.com Make an order or inquire about relevant matters.