山东铜门的大气典雅成为越来越多的人喜欢的装饰，玻璃工艺铜门更是铜门中的经典产品。玻璃工艺铜门的选材通常有 4种：黄铜、青铜、白铜、紫铜。下面来看看玻璃工艺铜门的制作处理流程：

The elegant atmosphere of Shandong copper door has become a favorite decoration for more and more people, and the glass process copper door is a classic product in the copper door. There are usually four kinds of materials for glass process copper doors: brass, bronze, white copper and red copper. Let's take a look at the manufacturing process of glass process copper door:

1、处理工艺：除油除锈除氧化皮——水洗——酸洗抛光——水洗——中和——水洗——着色处理——水洗——干燥及其它后处理。

1. Treatment process: oil removal, rust removal and scale removal - water washing - acid washing and polishing - water washing - neutralization - water washing - coloring treatment - water washing - drying and other post-treatment.

2、酸洗抛光使用铜材酸洗抛光液进行处理。目的是使黄铜表面具有光泽。

2. It is recommended to use copper pickling and polishing solution for pickling and polishing. The purpose is to make the brass surface glossy.

3、本品为工作液，将工件浸泡于本品中，2分钟左右黄铜表面即变成黑青色，根据实验结果。浸泡时间为20－25分钟时，表面变色***，可获得较好的防锈性能。工件可重复浸泡，增加变色层厚度，可获得满意效果。

3. This product is working fluid. Immerse the workpiece in this product, and the brass surface will turn black and cyan in about 2 minutes. According to the experimental results. When the soaking time is 20-25 minutes, the surface will change color * * *, and good rust prevention performance can be obtained. The workpiece can be soaked repeatedly to increase the thickness of the discoloration layer, and satisfactory results can be obtained.

4、如想达到古铜色，经上述步骤处理后，可用砂纸摩擦，方可达到理想的效果。

4. If you want to achieve the bronze color, after the above steps, you can use sandpaper to rub to achieve the ideal effect.

注意：

be careful:

1，使用铜门时，不要在门扇上悬挂过重的物品或避免尖锐的物品刻碰，划伤，开启或关闭门扇时，不要经常用力过猛或开启角度过大，以免损坏铜门。

1. When using a copper door, do not hang heavy objects on the door leaf or avoid sharp objects from being scratched. When opening or closing the door leaf, do not often use too much force or open the door at too large an angle to avoid damaging the copper door.

2，不要经常用带有水渍(或其它溶液)的手开启门锁，以免门锁变色，开启门锁或转动门锁把手时，不要用力过猛，从而减少门锁使用寿命，合页，江西铜门厂门锁等经常活动的五金配件，发生松动时要立即拧紧，门锁开启不灵时，可以往钥匙孔中加入适量的铅笔芯沫，切记用食用油之类的东西润滑。

2. Do not often open the door lock with water stains (or other solutions) to avoid discoloration of the door lock. When opening the door lock or turning the door lock handle, do not use excessive force, so as to reduce the service life of the door lock. When the hinge, Jiangxi Tongmen factory door lock and other frequently moving hardware accessories are loose, they should be tightened immediately. When the door lock cannot be opened properly, you can add an appropriate amount of pencil foam into the key hole, and remember to lubricate with edible oil and other things.

3，(玻璃工艺铜门)擦拭玻璃时，不要使清洗剂或水渗入玻璃压条缝隙内，以免压条变形，擦拭玻璃时不要用力过猛，以免玻璃破损伤及人身，玻璃破损后或有大的磕碰，要请维修人员进行维修。

3. (glass process copper door) when wiping the glass, do not let the cleaning agent or water penetrate into the gap of the glass batten to avoid the deformation of the batten. Do not use too much force when wiping the glass to avoid the glass damage and personal injury. After the glass is damaged or there is a big bump, please ask professional maintenance personnel to repair it.

玻璃工艺铜门是一种不管是外观或者是实用性都非常高的产品，使用的效果非常的好，蕴含的涵养和种类也是非常的多，玻璃工艺铜门毕竟是铜门中的一种，蕴含的性也就非常的好。您有需求就来我们网站http://www.jnqianfu.com咨询了解吧。

The glass process copper door is a product with high appearance and practicability. The use effect is very good, and there are many kinds of self-cultivation and varieties. After all, the glass process copper door is one of the copper doors, and the safety is very good. Come to our website if you need http://www.jnqianfu.com Consult and understand.