制造一扇铜门需要一定的时间，庭院铜门有很多道制作工序，厂家在制作的过程中需要严格把控好每个制作环节。那么需要注意哪些环节呢？下面由山东铜门厂家来给大家简单介绍一下其相关知识点。

It takes a certain amount of time to make a copper door. There are many manufacturing processes for the courtyard copper door, and the manufacturer needs to strictly control each production link during the manufacturing process. What links should we pay attention to? Next, Shandong Copper Door Factory will give you a brief introduction to its relevant knowledge points.

1、在生产中，如果设计和制造不合理，应注意铜板插入的位置，这将严重影响铜门的稳定性和外观形象。

1. In production, if the design and manufacturing are unreasonable, pay attention to the insertion position of the copper plate, which will seriously affect the stability and appearance of the copper door.

2、在设计中注意铜门的过渡这些地方都能体现铜门的立体感，如果把握不好就会失去我们铜门的特色。

2. Pay attention to the transition of the copper door in the design. These places can reflect the three-dimensional sense of the copper door. If we don't grasp it well, we will lose the characteristics of our copper door.

3、设计铜门时的测量如果尺寸错误，后续安装会带来很多麻烦，如果门框大，铜门太小，即使可以安装，效果也会很差，相反，铜门太小，铜门太大，根本不会安装。

3. If the measurement during the design of the copper door is wrong in size, the subsequent installation will bring a lot of trouble. If the door frame is large and the copper door is too small, even if it can be installed, the effect will be poor. On the contrary, the copper door is too small and the copper door is too large, so it will not be installed at all.

4、安装时要注意牢固，如果安装不稳，整个铜门会脱落，在以后使用中会留下隐患。

4. The installation shall be firm. If the installation is not stable, the entire copper door will fall off, leaving hidden dangers in future use.

5、铜门制作完成之后，大家还要注意：要铜门表面污迹时(如手印)，可采用哈气打湿后，用软布擦拭，如果用硬布擦拭的话，很容易划伤表面，污迹太重时可使用中性清洗剂、牙膏或家具专用清洗剂，去污后，立即擦拭干净。

5. After the fabrication of the copper door, we should also pay attention to that: when we want to remove the stains (such as fingerprints) on the surface of the copper door, we can use a soft cloth to wipe it after the air is wet. If we use a hard cloth to wipe it, it is easy to scratch the surface. If the stains are too heavy, we can use a neutral cleaner, toothpaste or furniture specific cleaner. After the decontamination, we can immediately wipe it clean.

铜门的校角处不要经常磨擦，以免造成棱角处饰面材料褪色破损。在木制产品上的灰尘时，不便用软棉布擦除时，可采用吸尘器进行。为保持铜门表面光泽和使用寿命，应定期进行清洁、除尘，可使用木制装修产品专用的养护液对其表面进行养护。

The corners of the copper door shall not be frequently rubbed to avoid fading and damage of the finishing materials at the corners. When removing dust from wooden products, a vacuum cleaner can be used to remove it when it is inconvenient to wipe it with soft cotton cloth. In order to maintain the surface luster and service life of the copper door, it should be cleaned and dedusted regularly, and the surface can be cured with the curing liquid special for wooden decoration products.

上述介绍了庭院铜门在制作过程中需要注意的细节，它外在美观，内在坚固耐用，收到很多家庭的青睐，但是在使用过程中也要好好保养，以延长其使用寿命。希望以上的内容能够对大家有所帮助，敬请关注我们的网站http://www.jnqianfu.com更新。

The above describes the details that need to be paid attention to in the production process of the courtyard copper door. It is beautiful in appearance and durable in nature, which is favored by many families. However, it should also be well maintained in the use process to extend its service life. I hope the above content can help you. Please pay attention to our website http://www.jnqianfu.com to update.