网站关键词:
当前所在位置:首页>>常见问题保养铜门表面色泽的四个方式常见问题

保养铜门表面色泽的四个方式

来源:http://www.jnqianfu.com 日期:2023-01-28 发布人:admin浏览次数:0
铜门在门业中非常受欢迎,因此保养铜门的色泽也成了一件非常重要的事。那么济南铜门表面的色泽要如何去保养维护呢?接下来由的小编来对此讲解一下吧,希望能够对大家有所帮助,具体内容如下:
Copper doors are very popular in the door industry, so it is very important to maintain the color of copper doors. So how to maintain the color of the surface of Jinan Copper Door? Next, let's talk about this by our editor. I hope it can help you. The details are as follows:
1、抛光和涂漆溶液具有腐蚀性。工作时穿戴防护装备。浸泡产品时,请确保它不会沾到皮肤上。如不慎溅到身上,应及时用水冲洗皮肤表面,并将溶液冲洗干净。
1. Polishing and painting solutions are corrosive. Wear protective equipment when working. When soaking the product, please ensure that it does not touch the skin. If it is accidentally splashed on the body, wash the skin surface with water in time and rinse the solution.
2、铜门框表面有层层脱脂、锈蚀和氧化物,用水冲洗干净。如果你不这么做,铜门在操作过程中很容易会生锈,进而对铜门的外观和使用寿命造成一定影响。
2. There are layers of degrease, rust and oxide on the surface of the copper door frame, which should be cleaned with water. If you don't do this, the copper door will easily rust during operation, which will have a certain impact on the appearance and service life of the copper door.
济南铜门
3、蚀刻、抛光和后续清洗。许多铜门制造商在此过程中使用铜蚀刻和抛光液,因为使用这种溶剂对铜门部件进行抛光可以使铜门的表面更加光滑。之后再给铜门上漆。具体流程可根据需要进行。将工件放入工作溶液中约2分钟。这时,铜门的颜色变会成黑色和蓝色,继续浸泡,随着时间的增加,古铜色在浸泡半小时左右就可以达到很好的效果,如果颜色不理想,可以增加浸泡时间,直到变色层的厚度达到满意为止。
3. Etching, polishing and subsequent cleaning. Many copper door manufacturers use copper etching and polishing solution in this process, because using this solvent to polish the copper door components can make the surface of the copper door more smooth. Then paint the copper door. The specific process can be carried out as required. Put the workpiece into the working solution for about 2 minutes. At this time, the color of the copper door will become black and blue, and continue to soak. With the increase of time, the bronze color can achieve good results after soaking for about half an hour. If the color is not ideal, you can increase the soaking time until the thickness of the color change layer is satisfactory.
4、由于铜门砂浆易挥发,抛光、涂装场所应安装在通风良好的地方,避免阳光直射,远离火源。
4. As the copper door mortar is volatile, the polishing and coating site should be installed in a well-ventilated place to avoid direct sunlight and fire sources.
以上四点是有关保养铜门表面色泽的四个方式的全部内容,对此您有不理解的地方随时来我们网站http://www.jnqianfu.com做咨询!
The above four points are all about the four ways to maintain the surface color of copper doors. If you don't understand this, please come to our website at any time http://www.jnqianfu.com Consulting!
新闻资讯
-News and information-
在线客服
二维码

扫描二维码