玻璃雨棚在施工时，哪些需要严格检查呢？严格的施工流程和检查是必不可少的，这样才能够保证工程的质量，山东铜门厂家认为在施工的过程中，要做好以下几方面的检查：

What strict inspections are required during the construction of a glass canopy? Strict construction procedures and inspections are essential to ensure the quality of the project. Shandong copper door manufacturer believes that during the construction process, the following aspects of inspection should be done well:

1、材料检查：玻璃雨棚所使用的各种材料必须符合设计和规范要求。材料采购前必须弄清楚规范中对该种材料有何质量要求。

1. Material inspection: The various materials used in the glass canopy must comply with the design and specification requirements. Before purchasing materials, it is necessary to clarify the quality requirements for this type of material in the specifications.

2、构件检查：各种构件在运输过程中必须有可靠的保护措施。构件外观表面无明显的凹面和损伤，划痕深度不大于0.5mm。焊疤、飞溅物、毛刺应清理干净。螺栓孔光滑，无毛刺，孔壁垂直度偏差不大于板厚的2%，孔圆度偏差不大于1%。

2. Component inspection: All components must have reliable protective measures during transportation. The appearance surface of the component shall have no obvious concave surface or damage, and the scratch depth shall not exceed 0.5mm. Welding scars, splashes, and burrs should be cleaned up. The bolt holes are smooth and free of burrs, and the deviation of the verticality of the hole wall is not more than 2% of the plate thickness, and the deviation of the hole roundness is not more than 1%.

3、悬挂臂安装焊接检查：悬挂臂安装焊接是雨棚施工中比较繁琐的工序，悬挂臂安装是否准确将影响整过施工过程。测量人员在工作中必须反复校对，确保放线精确，坡度正确。悬挂臂与预埋件的连接施工中，必须用合格焊工。焊接、防锈、安装精度必须合格。

3. Suspension arm installation and welding inspection: Suspension arm installation and welding are relatively complicated processes in canopy construction, and the accuracy of suspension arm installation will affect the overall construction process. Surveyors must repeatedly proofread during work to ensure accurate setting out and correct slope. Qualified welders must be used in the connection construction between the suspension arm and the embedded parts. Welding, rust prevention, and installation accuracy must be qualified.

4、钢材的品种、规格、型号和质量，合肥源顺安装公司建议必须符合设计要求、实测及有关标准的规定。钢材切割面必须无裂纹、夹渣分层和大于lmm的缺楞。构件外观表面无明显的凹面和损伤，划痕深度不大于0.5mm。焊疤、飞溅物、毛刺应清理干净。螺栓孔光滑，无毛刺，孔壁垂直度偏差不大于板厚的2%，孔圆度偏差不大于1%

4. The variety, specification, model, and quality of steel must comply with the design requirements, actual measurements, and relevant standards as recommended by Hefei Yuanshun Installation Company. The cutting surface of the steel must be free from cracks, slag layers, and gaps greater than 1mm. The appearance surface of the component shall have no obvious concave surface or damage, and the scratch depth shall not exceed 0.5mm. Welding scars, splashes, and burrs should be cleaned up. The bolt holes are smooth and free of burrs, and the deviation from the perpendicularity of the hole wall is not more than 2% of the plate thickness, while the deviation from the roundness of the hole is not more than 1%

注意事项：材料要符合国标；各种构件在运输过程中必须有可靠的保护措施。还有哪些事项要了解的可以随时来我们网站http://www.jnqianfu.com做咨询！

Attention: Materials should comply with national standards; Various components must have reliable protective measures during transportation. What else do you need to know? Feel free to visit our website at any time http://www.jnqianfu.com Consulting!